Water cooled Lister type Diesel Engines are manufactured under expert technical supervision. All parts are interchangeable with original Lister Type Engines products or Listeroid Engines. We focus so specially to meet the demand for various industries our engines are used in
agriculture, small industries also as a Stationary Engines for home or small office power generator. They are of robust and engineered to perfection. The mechanism is quite simple and thus enables the replacement of parts easily.
For Lister Spare parts kindly check out our spares division or click here.
It comes with a tool kit including a manual, spanners, screwdriver, small washers, some shims, circlips, starting handle etc and even an oil can! Air filter and exhaust silencer are in a separate box. Water connections are one inch BSP (11
TPI). There is also an extra 12 inch pulley in case required.
There are quite a few available types of the CS ranging from single cylinder to double cylinder models. As you are probably by now aware these engine can run on a variety of fuels ranging from diesel, biodiesel, vegetable oil (waste or new) and even waste engine oil. Of course all waste fuels must be filtered and dewatered to at least 10 micron otherwise damage to the injection pump is inevitable. If you need to know more about running these engines on alternative fuels click on one of the discussion forum links to find out more. More about filtering
here.
The single cylinder model types are 6 Hp , 8 Hp , 10 Hp and 12 Hp
The double cylinder model types are
12 Hp , 16 Hp , 20 Hp and 24 Hp
Full
specifications of the single cylinder models are as follows. All are fitted with
taper roller bearings. In case require bushings type kindly mention it.
No. | Particulars | 6/1 | 8/1 | 10/1 LOP | 10/1 CBW | 12/1 | |
01. | Rated Horse Power (HP) | B.H.P. | 6 | 8 | 10 | 10 | 12 |
02. | Maximum Gross Power | B.H.P./kw | 6/4.4 | 8/5.9 | 10/7.35 | 10/7.35 | 10/7.35 |
03. | Rated Speed | R.P.M. | 650 | 850 | 1000 | 1000 | 1000 |
04. | Cylinder Position | Vertical | Vertical | Vertical | Vertical | Vertical | |
05. | No. of Cylinder | One | One | One | One | One | |
06. | Cylinder
Bore & Stroke |
Inch m.m. |
4.5
X 5.5 114.3 X 139.7 |
4.5
X 5.5 114.3 X 139.7 |
4.75
X 5.5 120 X 139.7 |
4.75
X 5.5 120 X 139.7 |
5.12
X 5.5 130 X 139.7 |
07. | Flywheel
Dimension & Face |
Inch. m.m. |
23.62^{
}X 3.5 600 X 89 |
23.62^{
}X 3.5 600 X 89 |
20.23^{
}X 3.74 514 X 95 |
20.23^{
}X 3.74 514 X 95 |
23.62^{
}X 3.5 600 X 89 |
08. | Foundation
Stud Hole Center Distance |
Inch m.m. |
13
X 13 330 X 330 |
13
X 13 330 X 330 |
13
X 13 330 X 330 |
13
X 13 330 X 330 |
13
X 13 330 X 330 |
09. | Crankshaft
Center Dist. from Base |
Inch m.m. |
12.5 318 |
12.5 318 |
12.5 318 |
12.5 318 |
13.5 343 |
10. | Engine Total Height | Inch m.m. |
40 1016 |
40 1016 |
40 1016 |
40 1016 |
40 1016 |
11. | Fuel Oil Tank Capacity | Liter | 8 | 8 | 8 | 8 | 8 |
12. | Lub Oil Cap. in Chamber | Liter | 5 | 5 | 5 | 5 | 5 |
13. | Torque of Engine | N-m. Kg-m. |
64.67 6.46 |
66.32 6.63 |
70.22 7.02 |
70.22 7.02 |
84.32 8.43 |
14. | C. C. of Engine | Liter | 1.432 | 1.432 | 1.580 | 1.58 | 1.853 |
15. | Engine Net Weight | kgs. | 310 | 320 | 325 | 335 | 335 |
16. | Engine Gross Weight | kgs. | 410 | 420 | 420 | 435 | 435 |
17. | Size of Wooden Case | cms. | 96 X 72 X 112 | 96 X 72 X 112 | 96 X 72 X 112 | 96 X 72 X 112 | 96 X 72 X 112 |
18. | Volume / case | m3 | 0.774 | 0.774 | 0.774 | 0.774 | 0.774 |
19. | S.F.C.
at full Load & Std. Ref. Condition |
gms/kw/hr. gms/bhp/hr. |
268 197 |
268 197 |
268 197 |
268 197 |
268 197 |
20. | Comp. Ratio | 1:18 | 1:18 | 1:18 | 1:18 | 1:18 |
Full specifications of the Lister Type double cylinder models are as follows:
No. | Particulars | 12/2 | 16/2 | 20/2 | 24/2 | |
01. | Rated Horse Power (HP) | B.H.P. | 12 | 16 | 20 | 24 |
02. | Maximum Gross Power | B.H.P./kw | 12/8.8 | 16/11.77 | 20/14.7 | 24/17.65 |
03. | Rated Speed | R.P.M. | 650 | 850 | 1000 | 1000 |
04. | Cylinder Position | Vertical | Vertical | Vertical | Vertical | |
05. | No. of Cylinder | Two | Two | Two | Two | |
06. | Cyl. Bore & Stroke | Inch m.m. |
4.5
X 5.5 114.3 X 139.7 |
4.5
X 5.5 114.3 X 139.7 |
4.75
X 5.5 120 X 139.7 |
5.12
X 5.5 130 X 139.7 |
07. | Flywheel Dim. X Width | Inch | 23.5 X 3.5 | 23.5 X 3.5 | 20.5 X 3.5 | 20.27 X 4.13 |
08. | Foundation
Stud Hole Center Distance |
Inch m.m. |
22
X 15 560 X 382 |
22
X 15 560 X 382 |
22
X 15 560 X 382 |
22
X 15 560 X 382 |
09. | Crankshaft
Center Dist. from Base |
Inch m.m. |
9.8 249 |
9.8 249 |
9.8 249 |
9.8 249 |
10. | Engine
Total Height |
Inch m.m |
38 965 |
38 965 |
38 965 |
38 965 |
11. | Fuel Oil Tank Capacity | Liter | 13 | 13 | 13 | 13 |
12. | Lub. Oil Cap. in Chamber | Liter | 10 | 10 | 10 | 10 |
13. | Torque
of Engine |
N.m. Kgm. |
129.5 13.27 |
132.30 13.5 |
140.30 14.3 |
168.7 17.2 |
14. | C. C. of Engine | Liter | 1.43 | 1.43 | 1.58 | 1.853 |
15. | Engine Net Weight | Kgs. | 470 | 496 | 490 | 524 |
16. | Engine Gross Weight | Kgs. | 650 | 676 | 670 | 704 |
17. | Size of Wooden Case | cm. | 140 X 75 X 115 | 140 X 75 X 115 | 140 X 75 X 115 | 140 X 75 X 115 |
18. | Volume Case | m3 | 1.207 | 1.207 | 1.207 | 1.207 |
19. | Comp. Ratio | - | 1:18 | 1:18 | 1:20 | 1:20 |